Discussion:
ne1 have any info on binary liquids?
(too old to reply)
m***@gmail.com
2016-05-09 22:35:54 UTC
Permalink
With baking glistering pure20mls and sulphuric acid 60%ish (don't use pure)50mls and 50mls of pure nitric acid you will produce nitroglycerin. If you do not chill this mix during making the exothermic reaction causing a medium size explosion. If you keep the temp below 14 degrees Celsius and draw off the milky white nitroglycerin you can wash the acid out and use the solidified nitro for whatever.
Peter Fairbrother
2016-05-10 01:03:23 UTC
Permalink
Post by m***@gmail.com
With baking glistering pure20mls and sulphuric acid 60%ish (don't use
pure)50mls and 50mls of pure nitric acid you will produce
nitroglycerin. If you do not chill this mix during making the
exothermic reaction causing a medium size explosion. If you keep the
temp below 14 degrees Celsius and draw off the milky white
nitroglycerin you can wash the acid out and use the solidified nitro
for whatever.
There are at least three possibly-mortal errors and/or omissions in that.

List protocol is not to discuss high explosives here, except for pyro
use, so I won't say what they are.

If you really want to make nitroglycerine look elsewhere. It isn't hard
to find the real info.

-- Peter Fairbrother
Thomas Prufer
2016-05-11 12:31:31 UTC
Permalink
Post by Peter Fairbrother
If you really want to make nitroglycerine look elsewhere. It isn't hard
to find the real info.
-- Peter Fairbrother
But he does tell you how to make flat glass...


Thomas Prufer
Lloyd E. Sponenburgh
2016-05-11 21:41:34 UTC
Permalink
Post by Thomas Prufer
But he does tell you how to make flat glass...
No, he doesn't... so-called "float glass" isn't nearly as flat as 'plate'
glass, cast on a plate (no, duh!) <G>.

LLoyd
Anon Emous
2016-05-30 00:13:15 UTC
Permalink
Post by Lloyd E. Sponenburgh
No, he doesn't... so-called "float glass" isn't nearly as flat as 'plate'
glass, cast on a plate (no, duh!) <G>.
LLoyd
Pull this from the back or what is left of my mind.

http://www.britannica.com/technology/plate-glass


A technique developed in Great Britain in the 1950s, called the float-glass method, results in an important economy of space. The molten glass is conveyed onto a bath of a molten metal, such as tin. The high temperature of the molten metal smooths out any irregularities on the surface, making a flat, even sheet. As the glass floats on top of the bath, the temperature of the molten metal is gradually reduced until the glass solidifies.

One would be hard pressed to make a metal plate flatter then liquid tin.



The WiZard is in.
-----------------
At a Scottish wedding the bridegroom, as was
customary at a wedding breakfast, arose to
respond to the toast of the health of the bride. He
was not used to public speaking and, words
failing him, he contented himself with the response,
"Well, there's naething wrang with the woman" ; and
in proposing the toast of "Applied Science" he
should like to point the moral of this story, and say
that there was nothing wrong with it ; that it was in a
state of absolute health, and in this country, as well
as in others, it was in a state of marvelous fertility,
and as each branch of Applied Sciences was apparently
capable of producing any number of other branches of
Applied Science, as time went on they might expect
a somewhat numerous family.

Sir William Ramsay K.C.B.. D.Sc., LL.D., lF.R.S.
Bradford, Wednesday, July 15, 1903.


This was published in the Journal of the Society of Chemical
Industry of which I own 300 or so pounds from Volume 1 to ?

Loading...